Model no power dust wiper

Keyword:

Model no power dust wiper

Inquiry:

Detail

 

Dedusting Program of WDLC -B Type Precipitator
 

◎W hen material is discharged from the upper material to the lower belt at the transfer point of the material conveyor, a large amount of dust and induced air will be produced immediately when the material leaves the belt. (commonly known as induced air) With the material, it rushes to the sec-ond belt.Due to the action of kinetic cnergy potential cnergy and reaction force, high

concentration dust will be sprayed around. Dust can be efectively introduced into the main body of the dust colleetor under the action of fully en-closed material guide trough. The main body of the dust collector is separated by three stages to achieve the purpose of dust removal.
 

◎A mud blocking device is installed at the tail of the guide trough, which can ffectively cushion the impact of material flling. Its sealing efect can make the dust move along the conveyor belt and enter the next level of work flow. A small amount of dust eseaping backward will be blocked by the sealing plate.
 

◎The forward moving dust is efctively dredged into the main body of the dust clletor under the action of the fully encosed material guide
trough, and then separated by three stages of the main body: the first stage separation: after the dust enters the first stage separation device, the main dust ollector starts to work, and through the first stage separation device, the dust particles above 20 m (llectively referred to as dust -reducing) will be efectively separated by the separation device.

The second stage pressure release separation device: the dust continues to rise under the air pressure action, the dust enters the secondary separation device, bee ause the second stage separatin device is equipped, the atmospherie connection port, the air starts to release to the space, namely releases the pressure, After decompression, the dust can be further deposited, and the dust particles below 20 m will be separated ffctivele for the second time.
 

◎The third stage cyeloron separator: after the dust-containing air enters the third stage eyclotron, the air rotates under the action of air pressur. The centrifugal ffect of dust particles occurs in the rotational movement, which separates the fine particles (0-5 m particles) entering the third stage separator under the action of the separator. At this time, the dust can be completely separated from the drifting dust, s0 that the dust can be removed inside the dust removal device. Pressure is basically in balance with extermal pressure. 'The main body of dust removal can flectively separate more than 95% of the dust.
 

◎The third stage cyclotron separator: after the dust- containing air enters the third stage cyclotron, the air rotates under the action of air pressure. The centrifugal efect of dust particles occurs in the rotational movement, which separates the fine particles (0-5 m particles) entering the third stage separator under the action of the separator. Al this time, the dust can be completely separated from the driting dust, s0 that the dust can be removed . inside the dust removal device. Presure is basically in balance with extemal pressure. The main body of dust removal can ffectively separate more than 95% of the dust.
 

◎The remaining dust rubs, collides, afinit and agglomerates in the guide trough, so that the dust volume increases and falls back to the belt. The adjustable dust-blocking derice intalledl on the guide tank can ffectively prevent the dust spillover without afecting the coal flow forward. The pressure- -relief device is also installed on it to help separate the dust.
 

◎The biggest characteristic of the powerless dust cllector is that it does not need any power and energy(water) is the best in energy-saving prod-ucts, energy conservation is in place ,never wory Jifelong benefits.

Related products

Inquiry